Rikon 10-325 14-Inch Deluxe Band Saw
Rikon 10-325 14-Inch Deluxe Band Saw
Technical Details Rikon 10-325 14-Inch Deluxe Band Saw
- Quick-release blade tension
- 2 speeds: 1445/2950 ft/min
- Hinged blade guard with sight window
- Large 16-by-21-1/2-inch work table
- 4-inch dust port
Product Description
Rikon 10-325 14-Inch Deluxe Band Saw
Designed for Smooth, Uniform, Stable Performance
The RIKON 14-Inch Deluxe Bandsaw is driven by a 1-1/2-horsepower, 110/220-volt motor that functions smoothly and powerfully. And with a 13-inch re-saw capacity, it can easily re-saw slicing veneers, book-matched projects, and lumber sizing. Precision-balanced, solid cast iron wheels give the blade uniform operation, and the edge-facing thrust bearings also help to extend blade and bearing life while improving the stability of the blade during cutting.
Two Speeds for Different Cutting Applications
With a 13-inch cutting capacity and two speed settings, the RIKON 14-Inch Deluxe Bandsaw can be used for a variety of applications. The 1,445-feet/minute setting is ideal for hardwoods, some plastics, and non-ferrous metals, while the 2,950-feet/minute setting can be used for other woodworking applications.
Convenient Features Increase Functionality
A large, 16-inch by 21-1/2-inch table provides plenty of additional work space during woodcutting operations. You can also easily tilt and lock the table into place with the solid cast table trunnion. A convenient tool storage cabinet at the bottom of the unit gives you a place to keep extra blades, jigs, or other tools.
Heavy Duty, Adjustable Rip Fence
An included rip fence can be mounted on either the right or left side of the blade, and a re-saw bar can be attached to help correct any blade wandering during re-sawing. You can easily correct the fence for blade drift by turning the adjustment collars and fence bolts.
Quick-Release Blades and Viewing Windows for Easy Adjustments
It’s easy to assemble, operate, and adjust the RIKON 14-Inch Deluxe Bandsaw with the helpful manual, blade selection guide, and wheel adjustment tip sheet. Inset windows allow you to check the centering of the blade as well as the tension of the blade, so you can keep your operation running smoothly and accurately. You can also quickly release blade tension when changing blades or when the machine is off to help increase the life of the blade.
Rikon 10-325 14-Inch Deluxe Band Saw
Dust Port Keeps Work Area Clean
The 4-inch dust port helps you keep dust out of the air when you attach your dust collection system to the port opening.
The RIKON 10-325 14-Inch Deluxe Bandsaw is backed by a manufacturer’s two-year limited warranty.
What’s in the Box
RIKON 10-325 14-Inch Deluxe Bandsaw, work table, base cabinet, rip fence, tool holder, work light, owner’s manual, and parts for assembly.
Make exacting cuts in hardwoods, plastics, non-ferrous metals, and more
Customer Reviews
The system had no special problems, but the Guide see what is wrong to ridicule. It would be a bloody bad book, saw cheap, but it’s embarrassing for a book like a terrible car beautiful. instructions are rar. Material that is not compatible with illustrations / descriptions (some have). However, if you are mechanically inclined plane half (as I hope, if you buy a saw), you could understand.
One would hope, this powerful machine that cuts the curve resaws beautiful. Place a sheet (a lot) is required – Set treatment is marginal, a mechanism to adjust the fence square and incomplete chart (cheap) … But I would not use a lot of the fence anyway. This is a band saw, did not see a table. I will probably build or buy better resaw fence when I enter a project that requires a significant amount of resawing … However, the existing fence will now Like a book, and some strange minor fence on another impressive machine.
A short, this is a great saw – fit and finish is very good – and disadvantages (book seven) are just minor annoyances.
Make sure you get good blades. One that comes with it enough. I bought 3 / 4 Woodslicer re-saw blade in Highland wood, which was cut in the wood like a hot knife through butter. Viewing matches took a good find in good shape on wheels due to the depth. Besides a good fence, only the other proposals to improve I might add a magnetic switch in the light of a higher position. He entered each time, but still nice win. Buy it again in a heartbeat.
1: Install a new blade you will face your blades fit in the center and expand it.
2: square tables and a blade, and returned. (This Guide)
3: Adjusted bar assembly instructions that he plumb the blade, so it can not adjust the screws in four directions from the base of the head. 3 mm long will have T-Allen & tighten the 12 squares. “Loose spots four screws on the bottom and adjust the installation of well. Go slowly and remember that block the lever will push the bar as well. After the line good level is a guide book cylinders can adjust for any use.
4: Adjusted hemmed them instructions as required. Remember the roller screw release before trying to adjust the hem them or you can fold the landlord. With a good instruction-level line, move it up or down will not change the settings in your roll.
5: Kreg fence installed now, so I checked it cracks T. (Place of Commons is an item they skimped on.) I have not even installed it so I can not comment on the fence must be square and flat. Other people had trouble with the fence stock.
Now I have a bando second one in this He is quiet, smooth and accurate. Guide to the adjustment bar does not need to re-adjust or mountain guide. You can read the port where the dust is confusion. He did, and it does not block a truck cleaner. No more.
I do not know how accurate the strain gauge is for sure, it looks close, but until I can acutally measured, I do not know. Quick release tension lever is easily reached, but that short will need a step stool to adjust the tension button located on top of that.
I installed the base universal mobile saw the sale at Woodcraft # 145 488 and recommended that the base for all other bases (all manf important. Too). Yes there is a minor problem that can be made the same, but I see it sold hundreds less than competitors and do it as well as when you set up properly. I installed a tooth 4 1 / 2 “re-installation saw blade 8” piece of red oak, they treat him well. I am satisifed enough I waited so I could buy Rikon